Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 62)

8. 42" Head Platform Left Hand Drive
62 PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series
Splice Toe Boards Together
NOTE: Position bolt heads to the inside of the platform.
1. Place each set of toe board ends (HSP42015X and HSP42016X) together and line up bolt holes with
holes in splice plate (HSP42044X).
2. Fasten each set together using twenty (20) 3/8" x 1" HHCS bolts (S-7469) and 3/8" nuts (S-10028).
3. Place ends of “Z” toe boards (HSP42066X and HSP42038X) together and line up bolt holes with
holes in “Z” splice plate (HSP4248ZSPLX). Fasten each set together using twelve (12) 3/8" x 1"
HHCS bolts (S-7469) and 3/8" nuts (S-10028).
(See Figure 8L.)
Figure 8L