Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 57)

8. 42" Head Platform Left Hand Drive
PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series 57
2. Locate the large holes in decking (HSP42033X) and orient the decking so that the end of the decking
with the greater length from the holes is towards the lower head.
3. Insert deck channel support angles (HSP42014) through the outside holes of the decking and attach
decking to the toe board (HSP42064SX) and support channel (HSP42032X) using 5/16" x 1" flange
bolts (S-7470) and 5/16" flange nuts (S-3611).
4. Attach deck channel support angles (HSP42014) to the lower head bearing angle (42HDBRGN)
using 3/8" x 1" HHCS bolts (S-7469) and 3/8" flange nut (S-100028). (See Figure 8G.)
Figure 8G