Install safety cage – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 User Manual
Page 37
Advertising
6. Tie Angles, Ladders and Safety Cages
PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series
37
Install Safety Cage
Safety cages are 10' sections, with the exception of the 3' entrance section.
1. Locate safety cage hoops (LDR-BCKTBHP) along the ladder rails where the safety cage hoops will
be installed. NOTE: The end hoops of a 10' section are spaced 4' from the two (2) middle hoops,
which are spaced 2' apart.
for spacing.
Figure 6W 10' Safety Cage Section
Advertising