Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 46)

7. Rest Platform
46 PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series
Install Handrail Posts
1. Install the handrail platform posts (HP1648HCP) to the mounting channels and cross channels using
5/16" x 3/4" HHCS bolt (S-6606) and 5/16" flange nuts (S-3611).
2. All posts use four (4) bolts on the front.
3. The corner posts use two (2) additional bolts along the sides (for a total of six (6) bolts).
(See Figure 7J.)
Figure 7J 42"/48" Rest Platform Handrail Posts