Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 80)

9. 48" Head Platform Right Hand Drive
80 PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series
Decking Section: Down-Leg Hatch Side
NOTE: Be sure to install this section of decking by starting at the inside next to the toe board and
working outward.
1. Install the first deck plank (HSP48007X) on the hatch side at the down-leg end against the toe board
across all three (3) support channels (HSP42065X).
2. Next install the three (3) deck planks (HSP48008X) to the two (2) support channels (HSP42065X),
leaving an opening for the hatch.
3. Fasten the decking to the support channels (HSP42065X) using 5/16" x 1" flange bolts (S-7470) and
5/16" flange nuts (S-3611). (See Figure 9K.)
Figure 9K