Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 47)

7. Rest Platform
PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series 47
Assemble Intermediate Handrails
1. Assemble the intermediate handrails by sliding the small handrail into the larger handrail to create a
telescoping handrail that can be adjusted to the correct length between posts.
Two (2) of the small intermediate handrails (LDR-4088) and two (2) of the large intermediate
handrails (LDR-4087) will need to be cut to fit. The starting length of each handrail is 36". Cut 13" off
the end of each rail so the final length of each rail is 23".
(See Figure 7K.)
Figure 7K 42"/48" Intermediate Handrails
2. Fasten the intermediate handrails to the posts using 5/16" x 1" HHCS bolt (S-7470) and 5/16" flange
nuts (S-3611). (See Figure 7L.)
Figure 7L 42"/48" Telescoping Intermediate Handrail Posts