Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 12)

5. Ladder Assembly
12 PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series
Supported Bucket Height Reference Chart for 48"
NOTE: Ladders are of a modular design for ease of modification in the field. These illustrations are only
to be used as a “general” guide to installation layout. The exact assembly may vary due to the unique
nature of each bucket elevator.
See Figures 5A-5G on Pages 13-19 to help determine if the ladders should be started on the up-leg or
down-leg of the elevator and also aid in the ladder order and rest platform locations for bucket elevators
with heights from 50' through 230'.
Part # Supported Bucket Height (Ft.) Part # Supported Bucket Height (Ft.)
48XRLAD50 50-59 48XWLAD50 50-59
48XRLAD60 60-69 48XWLAD60 60-69
48XRLAD70 70-79 48XWLAD70 70-79
48XRLAD80 80-89 48XWLAD80 80-89
48XRLAD90 90-99 48XWLAD90 90-99
48XRLAD100 100-109 48XWLAD100 100-109
48XRLAD110 110-119 48XWLAD110 110-119
48XRLAD120 120-129 48XWLAD120 120-129
48XRLAD130 130-139 48XWLAD130 130-139
48XRLAD140 140-149 48XWLAD140 140-149
48XRLAD150 150-159 48XWLAD150 150-159
48XRLAD160 160-169 48XWLAD160 160-169
48XRLAD170 170-179 48XWLAD170 170-179
48XRLAD180 180-189 48XWLAD180 180-189
48XRLAD190 190-199 48XWLAD190 190-199
48XRLAD200 200-209 48XWLAD200 200-209
48XRLAD210 210-219 48XWLAD210 210-219
48XRLAD220 220-229 48XWLAD220 220-229
48XRLAD230 230-239 48XWLAD230 230-239
CAUTION
Due to O.H.S.A. standards, it is required that a rest platform be installed every 30'.