42" head platform left hand drive, Chapter 8 42" head platform left hand drive, Attach cross deck support channels to lower head – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 User Manual
Page 51: Chapter 8: 42" head platform left hand drive
Advertising
PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series
51
8. 42" Head Platform Left Hand Drive
Chapter 8: 42" Head Platform Left Hand Drive
NOTE: Left hand drive installation has shown. Right hand side installs the same but in opposite orientation.
Attach Cross Deck Support Channels to Lower Head
1. Place lower head section on solid and level service.
2. Assemble the support channels (HSP42012X, HSP42032X and HSP42065X) together with the
support channel splice plate (HSP4248CSPLX). Fasten together using eight (8) 3/8" x 1" HHCS bolts
(S-7469) and 3/8" flange nuts (S-10028).
Figure 8A
Advertising