Install handrail supports – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 User Manual
Page 64
Advertising
8. 42" Head Platform Left Hand Drive
64
PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series
Install Handrail Supports
NOTE: Position bolt heads to the inside of the platform.
1. Attach the ends of each support channel to the toe boards using six (6) handrail support brackets
(HSP4248HS). Fasten together using 3/8" x 1" HHCS bolts (S-7469) and 3/8" flange nuts (S-10028).
Figure 8N
Advertising