Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 92)

9. 48" Head Platform Right Hand Drive
92 PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series
Attach Knee Braces to Platform and Trunking (48" Only)
NOTE: If not using knee braces, platform must have external support.
1. Attach knee braces (HSP482PKB) to knee attachment support (HSP482KBA) on bottom of platform
using 3/8" x 1" HHCS bolts (S-7469) and 3/8" nuts (S-10028).
2. Attach the universal trunking knee brackets (HP482UTKB) to the trunking with rods.
3. Attach knee braces (HSP482PKB) to universal trunking knee brackets (HP482UTKB) using 3/8" x 1"
HHCS bolts (S-7469) and 3/8" nuts (S-10028).
Figure 9W
See detail BQ
on Page 93
See detail BP
on Page 93