Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 68)

8. 42" Head Platform Left Hand Drive
68 PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series
Install the Hatch
1. Install left and right hatch hinges (HSP36033 and HSP36002) to the toe board (HSP42015X) at the
hatch location using 5/16" x 1" flange bolts (S-7470) and 5/16 flange nuts (S-3611).
2. Align the hinges (HSP36033 and HSP36002) to the inside of the deck hatch hinge angles
(GBS36226X) already assembled to the hatch. (See Figure 8R below and Figure 8S on Page 69.)
3. Fasten together using 3/8" x 1" HHCS bolts (S-7469), 3/8" washers (S-248) and 3/8" nylock nuts.
Figure 8R