Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 76)

9. 48" Head Platform Right Hand Drive
76 PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series
Attach Toe Board Channels to Cross Support Channels
1. Position the toe boards (HSP48043X) along the side of the lower head.
2. Align toe boards with the cross channels as shown in Figure 9G .
3. Fasten toe boards to channels using 5/16" x 1" flange bolts (S-7470) and nuts (S-3611).
4. Install middle toe board (HSP42064SX) to the end of the side toe boards using 5/16" x 1" flange bolts
(S-7470) and nuts (S-3611).
Figure 9G