Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 User Manual
Page 79
Advertising
9. 48" Head Platform Right Hand Drive
PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series
79
Decking Section: Up-Leg Hatch Side
1. Install four (4) planks of decking (HSP48009X) on the drive side at the up-leg end. NOTE: Be sure
to install this section of decking by starting at the inside next to the toe board and working outward.
2. Fasten the decking to the three (3) cross channels (HSP482007X) using 5/16" x 1" flange bolts
(S-7470) and 5/16" flange nuts (S-3611).
Figure 9J
Advertising