Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 User Manual
Page 26
Advertising
6. Tie Angles, Ladders and Safety Cages
26
PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series
Figure 6I 48" Ladder to Ladder Brackets
3. Attach the next ladder section to the ladder brackets using 1/2" x 1" HHCS bolts (S-7935) and flange
nuts (S-8506) through the top most set of holes.
4. Secure the bottom of the ladder to the boot or ground. NOTE: Bracket for this step is not included.
Advertising