Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 23)

6. Tie Angles, Ladders and Safety Cages
PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series 23
3. 48" Down-Leg Boot Brackets: Use 3/8" x 1" HHCS bolts (S-7469) and 3/8" flange nuts (S-10028)
to attach the ladder support brackets (LAD48TRH and LAD48TLH) to the top of the boot tie angle
using holes indicated.
(See Figure 6E.)
Figure 6E 48" Down-Leg Boot Bracket
4. 48" Up-Leg Boot Brackets: Use 3/8" x 1" HHCS bolts (S-7469) and 3/8" flange nuts (S-10028) to
attach the ladder support brackets (LAD48TRH and LAD48TLH) to the top of the boot tie angle using
holes indicated.
(See Figure 6F.)
Figure 6F 48" Up-Leg Boot Bracket