Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 85)

9. 48" Head Platform Right Hand Drive
PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series 85
Install Handrail Supports
NOTE: Position bolt heads to the inside of the platform.
1. Attach the ends of each cross support channel to the toe boards using eight (8) handrail support
brackets (HSP4248HS). Fasten together using 3/8" x 1" HHCS bolts (S-7469) and 3/8" flange nuts
(S-10028).
(See Figure 9P.)
Figure 9P