Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 84)

9. 48" Head Platform Right Hand Drive
84 PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series
Splice Toe Boards Together
NOTE: Position bolt heads to the inside of the platform.
1. Place each set of toe board ends (HSP42015X and HSP48042X) together and line up bolt holes with
holes in splice plate (HSP42044X).
2. Fasten each set together using twenty (20) 3/8" x 1" HHCS bolts (S-7469) and 3/8” nuts (S-10028).
(See Figure 9O.)
3. Place ends of “Z” toe boards (HSP42066X and HSP42038X) together and line up bolt holes with
holes in “Z” splice plate (HSP4248ZSPLX). Fasten each set together using twelve (12) 3/8" x 1"
HHCS bolts (S-7469) and 3/8" nuts (S-10028).
(See Figure 9O.)
Figure 9O