Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 User Manual
Page 54
Advertising
![background image](/manuals/277528/54/background.png)
8. 42" Head Platform Left Hand Drive
54
PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series
Attach Toe Board Channels to Cross Support Channels
1. Position the toe boards (HSP42018X) along the side of the lower head.
2. Align toe boards with the support channels as shown in
3. Fasten to channels using four (4) 5/16" x 1" flange bolts (S-7470) and nuts (S-3611).
4. Install middle toe board (HSP42064X) to the end of the side toe boards using 1/2" x 1" HHCS bolts
(S-7935) and 1/2" flange nuts (S-8506).
Figure 8D
Advertising