Install the hatch – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 User Manual
Page 89
Advertising
9. 48" Head Platform Right Hand Drive
PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series
89
Install the Hatch
1. Install left and right hatch hinges (HSP36033 and HSP36002) to the toe board (HSP42015X) at the
hatch location using 5/16" x 1" flange bolts (S-7470) and 5/16" flange nuts (S-3611).
2. Align the hinges (HSP36033 and HSP36002) to the inside of the deck hatch hinge angles
(GBS36224 or HSP484055X) already assembled to the hatch.
3. Fasten together using 3/8" x 1" HHCS bolts (S-7469), 3/8" washers (S-248) and 3/8" nylock nuts.
Figure 9T
Advertising