Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 99)

10. 6 x 6 Distributor Platforms
PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series 99
Toe Boards
NOTE: 42" Assembly shown in R.H. configuration.
With support assembly attached to trunk and hardware tightened, proceed by attaching the notched toe
board angle (DSP36002X) and toe board angle (DSP36003X) to the top of the support channel using the
5/16" hardware provided. (Leave hardware loose.)
(See Figure 10F.)
Figure 10F