Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 59)

8. 42" Head Platform Left Hand Drive
PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series 59
Decking Section: Up-Leg Drive Side
1. Install five (5) planks of decking (HSP42006X) on the drive side at the up-leg end. NOTE: Be sure to
install this section of decking by starting at the inside next to the toe board and working outward.
2. Fasten the decking to the support channels (HSP42012X and HSP4248HS) using 5/16" x 1" flange
bolts (S-7470) and 5/16" flange nuts (S-3611). (See Figure 8I.)
Figure 8I