Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 29)

6. Tie Angles, Ladders and Safety Cages
PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series 29
2. For 48" Tie Angles: Install two (2) tie angles (GECT4804X or BECT4804X) to both sides of the
trunking seam using 1/2" x 1" HHCS bolts (S-7935) and 1/2" flange nuts (S-8506). (See Figure 6L
and Figure 6M.)
Figure 6L 48" Tie Angle Installation Locations
Figure 6M 48" Bucket Elevator Tie Angles to Trunking Bolt Locations