Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 41)

7. Rest Platform
PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series 41
2. For 48" Rest Platform Tie Angles:
Install the rest platform tie angles (RP48CHNLX2) to the lower trunking on both the ladder and
non-ladder sides using 1/2" x 1" HHCS bolts (S-7935) and 1/2" flange nuts (S-8506).
(See Figure 7C
and Figure 7D.)
Figure 7C 48" Rest Platform Tie Angles - Ladder Side
Figure 7D 48" Rest Platform Tie Angles - Non-Ladder Side