Deck channel support angle to channel supports – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 User Manual
Page 77
Advertising
9. 48" Head Platform Right Hand Drive
PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series
77
Deck Channel Support Angle to Channel Supports
NOTE: Support angles go through the deck plates. Therefore, three (3) middle deck planks will be installed
at the same time as the support angles.
1. Attach the deck channel support angles (HSP484038) to channel support assemblies (HSP484101)
using 3/8" x 1" HHCS bolts (S-7469) and 3/8" flange nuts (S-10028).
Figure 9H
Advertising