Distributor platform support (48" only) – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 User Manual
Page 111
Advertising
10. 6 x 6 Distributor Platforms
PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series
111
Distributor Platform Support (48" Only)
1. Attach the top end of the distributor platform support (DPL-48SPPT) to the side toeboard and
the decking.
2. Attach the lower end of the distributor platform support to the existing holes in the support brace.
3. Use 5/16" x 1" flange bolt (S-7470) and 5/16" flange nut (S-3611) for all connections.
Figure 10T
Advertising