Attach ladders to ladder support brackets for 48 – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 User Manual
Page 35
Advertising
6. Tie Angles, Ladders and Safety Cages
PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series
35
Attach Ladders to Ladder Support Brackets for 48"
1. Attach the top of the ladder section to the bottom ladder support brackets.
2. Attach the bottom of the ladder section to the top ladder support brackets.
3. Fasten ladders to ladder support brackets using 1/2" x 1" HHCS bolts (S-7935) and 1/2" flange nuts
(S-8506).
for 48" connections.)
Figure 6U
Advertising