Install rest platform mounting channels – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 User Manual
Page 42
Advertising
7. Rest Platform
42
PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series
Install Rest Platform Mounting Channels
1. Fasten rest platform mounting channels (RSP48203X) to rest platform tie angles using 1/2" x 1"
HHCS bolts (S-7935) and 1/2" flange nuts (S-8506).
NOTE: Install mounting channels with the flat side toward the trunking.
Figure 7E Bolt hole locations for 42" rest platform mounting channels to tie angles.
Figure 7F Bolt hole locations for 48" rest platform mounting channels to tie angles.
Advertising