Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 44)

7. Rest Platform
44 PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series
Install Rest Platform Deck Plate
NOTE: Location side is dependent upon through ladder opening.
1. Attach rest platform deck plate (RP482FDP) to the bottom of the rest platform cross channels
(RSP482CCX) and rest platform mounting channels (RSP48203X) using 3/8" x 1" HHCS bolts
(S-7469) and 3/8" flange nuts (S-10028).
2. Bolt heads must be installed against the deck plate. (See Figure 7H below and Figure 7I on Page 45.)
NOTE: The deck plate can be mounted on either the left side or right side, but the flange must always
be mounted towards the opening.
Figure 7H 42" Rest Platform Deck Plate