Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 96)

10. 6 x 6 Distributor Platforms
96 PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series
Support Channels and Knee Braces
Assemble clamps securely to the trunk, attach the platform support channel (DSP36005) to the upper
clamp using 1/2" hardware.
Insert rod (DSP36008) through middle hole in the bracket, attached to the platform support channel using
5/8" hex nut (S-4110), 5/8" lock washer (S-3208) and two (2) 5/18" flat washers (S-858). The knee braces
will attach in the upper set of holes on side of support channels using 1/2" hardware.
(See Figure 10C.)
Figure 10C