Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 71)

PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series 71
9. 48" Head Platform Right Hand Drive
Chapter 9: 48" Head Platform Right Hand Drive
NOTE: Right hand drive installation has shown. Left hand side installs the same but in opposite orientation
Attach Cross Support Channels to Lower Head
1. Align the bolt holes that are located next to the cross channel splice plate (HSP484039) of the cross
channels (HSP482007X) to the main support channel (HSP484101) located on the hatch side. They
all face the same direction except for the next to last on the discharge end. Fasten together using
eight (8) 3/8" x 1" HHCS bolts (S-7469) and 3/8" flange nuts (S-968).
(See Figure 9A below and
Figure 9B on Page 72.)
Figure 9A