Xylem ECOCIRC XL & XLplus - Manual (Page 16)

1 Introduction and Safety
1.1 Introduction
Purpose of this manual
The purpose of this manual is to provide necessary
information for:
• Installation
• Operation
• Maintenance
CAUTION:
Read this manual carefully before instal-
ling and using the product. Improper
use of the product can cause personal
injury and damage to property, and
may void the warranty.
NOTICE:
Save this manual for future reference, and keep it
readily available at the location of the unit.
1.2 Safety terminology and symbols
Hazard levels
Hazard level Indication
DANGER:
A hazardous situation
which, if not avoided,
will result in death or se-
rious injury
WARNING:
A hazardous situation
which, if not avoided,
could result in death or
serious injury
CAUTION:
A hazardous situation
which, if not avoided,
could result in minor or
moderate injury
NOTICE:
• A potential situation
which, if not avoided,
could result in unde-
sirable conditions
• A practice not relat-
ed to personal injury
Hazard categories
Hazard categories can either fall under hazard lev-
els or let specific symbols replace the ordinary haz-
ard level symbols.
Electrical hazards are indicated by the following
specific symbol:
Electrical Hazard:
Hot surface hazard
Hot surface hazards are indicated by a specific
symbol that replaces the typical hazard level sym-
bols:
CAUTION:
1.3 Inexperienced users
WARNING:
This product is intended to be operated
by qualified personnel only.
Be aware of the following precautions:
• Persons with diminished capacities should not
operate the product unless they are supervised
or have been properly trained by a professio-
nal.
• Children must be supervised to ensure that they
do not play on or around the product.
1.4 Warranty
For information about warranty, see the sales con-
tract.
1.5 Spare parts
WARNING:
Only use original spare parts to replace
any worn or faulty components. The use
of unsuitable spare parts may cause
malfunctions, damage, and injuries as
well as void the guarantee.
For more information about the product's spare
parts, refer to the Sales and Service department.
1.6 EC DECLARATION OF CONFORMITY
(TRANSLATION)
XYLEM SERVICE ITALIA SRL, WITH HEADQUAR-
TERS IN VIA VITTORIO LOMBARDI 14 - 36075
MONTECCHIO MAGGIORE VI - ITALY, HEREBY DE-
CLARES THAT THE PRODUCT
CIRCULATOR (SEE LABEL ON FIRST PAGE) *
[* in one of following versions: ECOCIRC XL, ECO-
CIRC XLplus, ECOCIRC XLplus with RS485 module,
ECOCIRC XLplus with module Wireless. RS485 and
Wireless modules supplied on request with the
mounting on installer’s care].
FULFILS THE RELEVANT PROVISIONS OF THE
FOLLOWING EUROPEAN DIRECTIVES
• MACHINERY 2006/42/EC (ANNEX II: THE
TECHNICAL FILE IS AVAILABLE FROM XYLEM
SERVICE ITALIA SRL)
• ELECTROMAGNETIC COMPATIBILITY
2004/108/EC.
• RADIO EQUIPMENT AND TELECOMMUNICA-
TIONS TERMINAL EQUIPMENT 1999/5/EC
(Wireless module).
• ECODESIGN 2009/125/EC, REGULATION (EC)
No.641/2009, REGULATION (EU) No.
622/2012: EEI ≤ 0, …. (SEE LABEL ON FIRST
PAGE). (Annex I: “The benchmark for the most
efficient circulators is EEI ≤ 0,20.”).
AND THE FOLLOWING TECHNICAL STANDARDS
• EN 60335-1, EN 60335-2-51, EN 62233.
• EN 55014-1:2006 + A1:2009 + A2:2011, EN
55014-2:1997 + A1:2001 + A2:2008, EN
61000-3-2:2006 + A1:2009 +A2:2009, EN
61000-3-3:2008, 61800-3:2004+A1:2012.
• EN 60950-1, EN 301 489-17, EN 300 328 (Wire-
less module).
• EN 16297-1, EN 16297-2.
en - Translation of the original instructions
16