2 transportation and storage, 1 inspect the delivery, 2 transportation guidelines – Xylem ECOCIRC XL & XLplus User Manual

Page 17: 3 storage guidelines, 1 storage location, 3 product description, 1 pump design, 2 product denomination, 3 technical data

Advertising
background image

MONTECCHIO MAGGIORE, 02.09.2013
AMEDEO VALENTE
(DIRECTOR OF ENGINEERING AND R&D)
rev.00

Lowara is a trademark of Lowara srl Unipersonale,

subsidiary of Xylem Inc.

2 Transportation and Storage

2.1 Inspect the delivery

1. Check the outside of the package.
2. Notify our distributor within eight days of the

delivery date, if the product bears visible signs

of damage.

3. Remove the staples and open the carton.
4. Remove the securing screws or the straps from

the wooden base (if any).

5. Remove packing materials from the product.

Dispose of all packing materials in accordance

with local regulations.

6. Inspect the product to determine if any parts

have been damaged or are missing.

7. Contact the seller if anything is out of order.

2.2 Transportation guidelines

Precautions

WARNING:

• Observe accident prevention regu-

lations in force.

• Crush hazard. The unit and the com-

ponents can be heavy. Use proper

lifting methods and wear steel-toed

shoes at all times.

Check the gross weight that is indicated on the

package in order to select proper lifting equip-

ment.

Position and fastening
The unit can be transported only in vertical position

as indicated on the package. Make sure that the

unit is securely fastened during transportation and

cannot roll or fall over. The product must be trans-

ported at an ambient temperature from -40°C to

70°C (-40°F to 158°F) with humidity <95% and pro-

tected against dirt, heat source, and mechanical

damage.

2.3 Storage guidelines

2.3.1 Storage location

NOTICE:

• Protect the product against humidity, dirt, heat

sources, and mechanical damage.

• The product must be stored at an ambient tem-

perature from -25°C to 55°C (-13°F to 131°F)

and humidity < 95%.

3 Product Description

3.1 Pump design

The pump is a wet rotor circulation pump with en-

ergy-efficient electronically commutated perma-

nent magnet technology, ECM technology. The

pump does not require a release/ventilation screw.

Intended use
The pump is suitable for:

• Domestic hot water (only for bronze pump

housing models)

• Hot water heating systems

• Cooling and cold water systems

The pump can also be used for:

• Solar systems

• Geothermal systems

Improper use

DANGER:
Do not use this pump to handle flam-

mable and/or explosive liquids.

WARNING:
Improper use of the pump may create

dangerous conditions and cause per-

sonal injury and damage to property.

NOTICE:
Do not use this pump to handle liquids containing

abrasive, solid, or fibrous substances, toxic or cor-

rosive liquids, potable liquids other than water, or

liquids not compatible with the pump construction

material.

An improper use of the product leads to the loss of

the warranty.

3.2 Product denomination

Example: ecocirc XLplus D 40-100 F

ecocirc XL

high efficiency pump

series

plus

with communication ca-

pabilities

D

Pump type:
"empty" = single pump
D = twin pump
B = bronze pump hous-

ing for domestic hot wa-

ter pumping

40

Flange connection nom-

inal diameter

-100

Maximum head of the

pump -100 = 10m

F

Flange type:
F = Flanged
"empty" = Threaded

3.3 Technical data

en - Translation of the original instructions

17

Advertising