XLT Hitachi X200 - Manual (Page 287)

“A” Group Parameters Default Setting
Func.
Code
Name
-FE
(EU)
-FU
(USA)
B031
=10
User
Setting
A043 Manual torque boost frequency
adjustment 10.0 10.0 9
A243 Manual torque boost frequency
adjustment, 2nd motor 0.0 0.0 9
A044 V/f characteristic curve selection 00 00
U
A244 V/f characteristic curve selection,
2nd motor 00 00
U
A045 V/f gain setting 100. 100. 9
A245 V/f gain setting, 2nd motor 100. 100. 9
A051 DC braking enable 00 00 9
A052 DC braking frequency setting 0.5 0.5 9
A053 DC braking wait time 0.0 0.0 9
A054 DC braking force for deceleration 0. 0. 9
A055 DC braking time for deceleration 0.0 0.0 9
A056 DC braking / edge or level detection for
[DB] input 01 01 9
A061 Frequency upper limit setting 0.0 0.0 9
A261 Frequency upper limit setting, 2nd
motor 0.0 0.0 9
A062 Frequency lower limit setting 0.0 0.0 9
A262 Frequency lower limit setting, 2nd
motor 0.0 0.0 9
A063,
A065,
A067
Jump (center) frequency setting 0.0
0.0
0.0 0.0
0.0
0.0 9
A064,
A066,
A068
Jump (hysteresis) frequency width
setting 0.5
0.5
0.5 0.5
0.5
0.5 9
A071 PID enable 00 00 9
A072 PID proportional gain 1.0 1.0 9
A073 PID integral time constant 1.0 1.0 9
A074 PID derivative time constant 0.0 0.0 9
A075 PV scale conversion 1.00 1.00 9
A076 PV source setting 00 00 9
A077 Reverse PID action 00 00 9
A078 PID output limit 0.0 0.0 9
A081 AVR function select 00 00 U
A082 AVR voltage select 230/400 230/460
U
A085 Operation mode selection 00 00 U
A086 Energy saving mode tuning 50.0 50.0
U
A092 Acceleration (2) time setting 15.00 15.00 9
A292 Acceleration (2) time setting, 2nd motor 15.00 15.00 9
A093 Deceleration (2) time setting 15.00 15.00 9
A293 Deceleration (2) time setting, 2nd motor 15.00 15.00 9
C 4
Appe
ndix C
C −4
Appendix C