XLT Hitachi X200 User Manual

Page 51

Advertising
background image

Logic Connector Introduction

After removing the front housing cover, take a moment to become familiar with the
connectors, as shown below.

HIGH VOLTAGE: Hazard of electrical shock. Never touch the exposed PCB conductors
while the unit is powered up. Also, the inverter must be powered OFF before you change
any of the DIP switch settings.

2

4

Inverter Mounting

and i

n

st

all

ation

Relay output
contacts

Logic and analog
signal connections

Danger! Do not touch!

Serial
communication port

2

−4

Inverter Mountingand

installation

Advertising