Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 213)

Multi-Service IronWare Switching Configuration Guide 183
53-1003036-02
Configuring super aggregated VLANs
7
Brocade-A(config-vlan-103)# untagged ethernet 1/3
Brocade-A(config-vlan-103)# exit
Brocade-A(config)# vlan 104
Brocade-A(config-vlan-104)# tagged ethernet 2/1
Brocade-A(config-vlan-104)# untagged ethernet 1/4
Brocade-A(config-vlan-104)# exit
Brocade-A(config)# vlan 105
Brocade-A(config-vlan-105)# tagged ethernet 2/1
Brocade-A(config-vlan-105)# untagged ethernet 1/5
Brocade-A(config-vlan-105)# exit
Brocade-A(config)# write memory
Commands for device B
The commands for configuring device B are identical to the commands for configuring device A.
Notice that you can use the same channel VLAN numbers on each device. The devices that
aggregate the VLANs into a path can distinguish between the identically named channel VLANs
based on the ID of the path VLAN.
Brocade-B(config)# vlan 101
Brocade-B(config-vlan-101)# tagged ethernet 2/1
Brocade-B(config-vlan-101)# untagged ethernet 1/1
Brocade-B(config-vlan-101)# exit
Brocade-B(config)# vlan 102
Brocade-B(config-vlan-102)# tagged ethernet 2/1
Brocade-B(config-vlan-102)# untagged ethernet 1/2
Brocade-B(config-vlan-102)# exit
Brocade-B(config)# vlan 103
Brocade-B(config-vlan-103)# tagged ethernet 2/1
Brocade-B(config-vlan-103)# untagged ethernet 1/3
Brocade-B(config-vlan-103)# exit
Brocade-B(config)# vlan 104
Brocade-B(config-vlan-104)# tagged ethernet 2/1
Brocade-B(config-vlan-104)# untagged ethernet 1/4
Brocade-B(config-vlan-104)# exit
Brocade-B(config)# vlan 105
Brocade-B(config-vlan-105)# tagged ethernet 2/1
Brocade-B(config-vlan-105)# untagged ethernet 1/5
Brocade-B(config-vlan-105)# exit
Brocade-B(config)# write memory
Commands for device C
Since device C is aggregating channel VLANs from devices A and B into a single path, you need to
change the tag type and enable VLAN aggregation.
Brocade-C(config)# tag-type 9100
Brocade-C(config)# vlan 101
Brocade-C(config-vlan-101)# tagged ethernet 4/1
Brocade-C(config-vlan-101)# untagged ethernet 3/1
Brocade-C(config-vlan-101)# exit
Brocade-C(config)# vlan 102
Brocade-C(config-vlan-102)# tagged ethernet 4/1
Brocade-C(config-vlan-102)# untagged ethernet 3/2
Brocade-C(config-vlan-102)# exit
Brocade-C(config)# write memory