Disabling and re-enabling fast port span, Excluding specific ports from fast port span – Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) User Manual

Page 376

Advertising
background image

346

Multi-Service IronWare Switching Configuration Guide

53-1003036-02

STP feature configuration

12

An STP Configuration BPDU has been received on the port, thus indicating the presence of
another bridge on the port.

You also can explicitly exclude individual ports from Fast Port Span if needed. For example, if the
only uplink ports for a wiring closet switch are Gbps ports, you can exclude the ports from Fast Port
Span.

Disabling and re-enabling fast port span

Fast Port Span is a system-wide parameter and is enabled by default. Therefore, all ports that are
eligible for Fast Port Span use it.

To disable or re-enable Fast Port Span, enter the following commands.

Brocade(config)#no fast port-span

Brocade(config)#write memory

Syntax: [no] fast port-span

NOTE

The fast port-span command has additional parameters that let you exclude specific ports. These
parameters are shown in the following section.

To re-enable Fast Port Span, enter the following commands.

Brocade(config)#fast port-span

Brocade(config)#write memory

Excluding specific ports from fast port span

To exclude a port from Fast Port Span while leaving Fast Port Span enabled globally, enter
commands such as the following.

Brocade(config)#fast port-span exclude ethernet 1

Brocade(config)#write memory

To exclude a set of ports from Fast Port Span, enter commands such as the following.

Brocade(config)#fast port-span exclude ethernet 1 ethernet 2 ethernet 3

Brocade(config)#write memory

To exclude a contiguous (unbroken) range of ports from Fast Span, enter commands such as the
following.

Brocade(config)#fast port-span exclude ethernet 1 to 24

Brocade(config)#write memory

Syntax: [no] fast port-span [exclude ethernet <port> [ethernet <port>] | to [<port>]]

Specify the port variable in one of the following formats:

FWS, FCX, and ICX stackable switches – stack-unit/slotnum/portnum

FSX 800 and FSX 1600 chassis devices – slotnum/portnum

ICX devices – slotnum/portnum

FESX compact switches – portnum

Advertising