Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 726)

696 Multi-Service IronWare Switching Configuration Guide
53-1003036-02
PIM Over MCT
18
Received messages dropped because MCT VLAN unrecognized : 0
Received messages dropped because of bad message type : 0
Received messages dropped because of bad checksum : 0
Received bytes skipped because of sync or checksum errors : 0
Brocade#
Syntax: show ipv6 pim count mct
Displaying IGMP Interfaces
Use the show ip igmp interface command to show the IGMP Query suppression state on CCEP
ports.
Brocade#show ip igmp interface
---------+------+---------+---------------+---------+-----+-----+---------
Intf/Port|Groups| Version |Querier | Timer |V1Rtr|V2Rtr|Tracking
| |Oper Cfg| |OQrr GenQ| | |
---------+------+----+----+---------------+----+----+-----+-----+---------
v200 2 2 - Disabled
e2/15 2 - Self 0 59 No No
e2/1 2 - Self 0 59 No Yes
e1/5 2 - Self (MCT-Blk) 0 40 No No
Brocade#
Refer to “Displaying the IGMP status of an interface” for output descriptions.
Displaying MLD Interfaces
Use the show ipv6 mld interface command to show the IGMP Query suppression state on CCEP
ports.
Brocade#show ipv6 mld interface
---------+------+---------+---------------------------------------+---------+-----+---------
Intf/Port|Groups| Version |Querier | Timer |V1Rtr|Tracking
| |Oper Cfg| |OQrr GenQ| |
---------+------+----+----+---------------------------------------+----+----+-----+---------
v62 0 2 2 Disabled
e2/1 2 - Self (MCT-Blk) 0 79 No
e1/37 2 - Self 0 108 No
e1/33 2 - Self 0 108 No
Brocade#
Refer to “Displaying IPv6 PIM interface information” for output descriptions.
Sample configuration
MCT Peer 1
lag "AMERICAS-CCEP-1-1" static id 11
ports ethernet 1/5 to 1/6
primary-port 1/5
deploy
lag "AMERICAS-ICL" static id 1
ports ethernet 2/1 to 2/2
primary-port 2/1
deploy
vlan 200
untagged ethe 2/15
tagged ethe 1/5 to 1/6 ethe 2/1 to 2/2
router-interface ve 200