Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 898)

868 Multi-Service IronWare Switching Configuration Guide
53-1003036-02
MMRP networks
21
Brocade_AS1(config-if-e10000-1/1)#port-type backbone-network
Brocade_AS1(config-if-e10000-1/1)#exit
Brocade_AS1(config)#esi iptv-service encapsulation isid
Brocade_AS1(config-esi-iptv-service)#isid 10000
Brocade_AS1(config-esi-iptv-service-isid-10000)#exit
Brocade_AS1(config)#esi iptv-carrier encapsulation bvlan
Brocade_AS1(config-esi-iptv-carrier)#vlan 10
Brocade_AS1(config-esi-iptv-carrier-vlan-10)#tagged ethernet 1/1
Brocade_AS1(config-esi-iptv-carrier-vlan-10)#esi-client iptv-service
Sample configuration on CS1
Brocade_CS1(config)#mmrp enable
Brocade_CS1(config)#mmrp include-vlan 10 20
Brocade_CS1(config)#int e 1/2 e 1/10 e 1/12 e 1/15
Brocade_CS1(config-mif-1/2, 1/10, 1/12, 1/15)#mmrp enable
PBB configuration MLX for B-VLAN 10
Brocade_CS1(config)# vlan 10
Brocade_CS1(config-vlan-10)#tag e 1/2 e 1/10 e 1/12 e 1/15
Brocade_CS1(config)#
PBB configuration on Metro for B-VLAN 10
Brocade_CS1(config)#interface e 1/2 e 1/10 e 1/12 e 1/15
Brocade_CS1(config-if-e10000-1/1)#port-type backbone-network
Brocade_CS1(config-if-e10000-1/1)#exit
Brocade_CS1(config)#esi iptv-carrier encapsulation bvlan
Brocade_CS1(config-esi-iptv-carrier)#vlan 10
Brocade_CS1(config-esi-iptv-carrier-vlan-10)#tagged e 1/2 e 1/10 e 1/12 e 1/15
MMRP is used with PBB for the registration and declaration of Multicast B-DA MAC.
Declaration of MAC
The declaration of the multicast MAC is done by the BEB. In the topology described above, the
declaration is sent if AS1 is
• Brocade NetIron CER and Brocade NetIron CES
• when an ISID ESI IPTV-service is added as client to the B-VLAN ESI IPTV-carrier
• when MMRP is enabled on the port belonging to a B-VLAN with ISID clients associated
• when a port enabled with MMRP is tagged to B-VLAN with ISID clients associated
• Brocade MLX series and Brocade NetIron XMR
• when B-VLAN 10 ISID 10000 endpoint is created in the VPLS instance
• when MMRP is enabled on the port where B-VLAN and ISID is configured
When MMRP sends Join PDU on ports in the B-VLAN. The attribute declared here would be the
multicast flood MAC (011e.8300.2710).
Displaying the declared MAC on AS1
Brocade_AS1# show mmrp attributes
Port Vlan Mac-address Registrar Registrar Applicant
State Mgmt State
----------------------------------------------------------------------------
1/1 10 011e.8300.2710 IN Fixed Quiet Active
Registration of MAC
CS1 receives this declaration on port 1/2 and will register it. It will then propagate the declaration
to all the ports of the B-VLAN that are in the forwarding state.