Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 725)

Multi-Service IronWare Switching Configuration Guide 695
53-1003036-02
PIM Over MCT
18
MJ - Membership Join, MI - Membership Include, ME - Membership
Exclude
BR - Blocked RPT, BA - Blocked Assert, BF - Blocked Filter, BI -
Blocked IIF,
BM - Blocked MCT
Total entries in mcache: 1
1 (2062:62:62:62::11, ff1a::2) in v62 (tag e1/1), Uptime 00:00:58
(SM) upstream neighbor is L2 fe80::21b:edff:fea4:a441. RP
2001:1:2:3:4::b Flags (0x304680c1) SM SPT LSRC LRCV HW FAST fast
ports: AgeSltMsk: 00000003, FID: 0xffff (D), DIT: NotReq, profile: none,
KAT Timer value: 240 Forwarding_oif: 0, Immediate_oif: 0, Blocked_oif:
1 Blocked OIF 1:
TR(e1/39,e1/39)(VL62), 00:00:01/0, Flags: MJ BM
Number of matching entries: 1
MLX#
Refer to “Displaying the IPv6 PIM multicast cache” for output descriptions.
Displaying MCT PIM Count
To display the statistics and error counters for the Multicast MDUP channel between the MCT
peers, use the show ip pim count mct command.
Brocade#show ip pim count mct
Multicast MCT Statistics for IPv4 (UP):
Messages assembled into the send buffer : 11811
Messages processed out of the recv buffer: 0
Segments sent successfully to TCP : 11762
Segments failed to be accepted by TCP : 0
Segments assembled into the receive buffer : 0
Messages dropped because (size > 1500) : 0
Messages dropped because it won't fit into available space in send buffer : 0
Segments dropped because it won't fit into available space in receive buffer: 0
Received messages dropped because of cluster-id mismatch : 0
Received messages dropped because the peer was not recognized : 0
Received messages dropped because cluster not active : 0
Received messages dropped because MCT VLAN unrecognized : 0
Received messages dropped because of bad message type : 0
Received messages dropped because of bad checksum : 0
Received bytes skipped because of sync or checksum errors : 0
Brocade#
Syntax: show ip pim count mct
To display the MCT IPv6 PIM count, use the show ipv6 pim count mct command.
Brocade#show ipv6 pim count mct
Multicast MCT Statistics for IPv6 (UP):
Messages assembled into the send buffer : 279
Messages processed out of the recv buffer: 523
Segments sent successfully to TCP : 279
Segments failed to be accepted by TCP : 0
Segments assembled into the receive buffer : 293
Messages dropped because (size > 1500) : 0
Messages dropped because it won't fit into available space in send buffer : 0
Segments dropped because it won't fit into available space in receive buffer: 0
Received messages dropped because of cluster-id mismatch : 0
Received messages dropped because the peer was not recognized : 0
Received messages dropped because cluster not active : 0