Sample mct snooping configuration – Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) User Manual
Page 717
Advertising
Multi-Service IronWare Switching Configuration Guide
687
53-1003036-02
MCT Snooping
18
There are no specfic MCT commands for configuring MCT snooping. Below is a sample MCT
snooping configuration .
Sample MCT snooping configuration
!
lag "CLIENT-1" dynamic id 6
ports ethernet 2/1
primary-port 2/1
deploy
!
!
lag "CLIENT-2" static id 5
ports ethernet 1/7 ethernet 1/12 ethernet 1/23 ethernet 1/40 ethernet 1/42
ethernet 1/47
primary-port 1/47
deploy
!
!
lag "ICL-1" static id 4
ports ethernet 1/1 ethernet 1/25 to 1/27
primary-port 1/1
deploy
!
!
vlan 21
untagged ethe 1/7 ethe 1/12 ethe 1/23 ethe 1/40 ethe 1/42 ethe 1/47 ethe 2/1
tagged ethe 1/1 ethe 1/25 to 1/27
router-interface ve 21
multicast active
!
vlan 31
Advertising