Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 670)

640 Multi-Service IronWare Switching Configuration Guide
53-1003036-02
About Multi-Chassis Trunk (MCT)
18
Clear MAC commands
To clear all MACs in the system, enter a command such as the following.
Brocade#clear mac
Syntax: clear mac
Clear cluster specific MACs
To clear cluster specific MACs in the system, enter a command such as the following.
Brocade#clear mac cluster TOR 1 local
Syntax: clear mac cluster <cluster-id> | <cluster-name> { local | remote }
Clear client specific MACs
To clear client specific MACs in the system, enter a command such as the following.
Brocade#clear mac cluster TOR 1 client 1 local
Syntax: clear mac cluster <cluster-id> | <cluster-name> client <client-name> { local | remote }
Clear VLAN specific MACs
To clear VLAN specific MACs in the system, enter a command such as the following.
Brocade#clear mac vlan 2
Syntax: clear mac vlan <vlan_id>
Clear cluster VLAN specific MACs
To clear cluster VLAN specific MACs in the system, enter a command such as the following.
Brocade#clear mac cluster cluster TOR 1 vlan 1 local
Syntax: clear mac cluster <cluster_id> | <cluster-name> vlan <vlan_id> {Local | Remote}
Clear cluster client vlan specific MACs
To clear cluster client specific MACs in the system, enter a command such as the following.
Brocade#clear mac cluster TOR 1 vlan 2 client client 1 local
Syntax: clear mac cluster <cluster_id> |< cluster-name> vlan <vlan_id> client <client_name>
{Local | Remote}
Displaying MDUP packet statistics
To display the statistics of MDUP packets, enter a command such as the following.
Brocade#show mac mdup-stats
MDUP Information
================
MDUP Data buffers in queue : 0
MDUP Statistics
===============
MDUP Update Messages sent: 7
Add Mac sent: 20
Del Mac sent: 0
Move Mac sent: 0
MDUP Mac Info Messages sent: 1