Existing display command, Clear vlan all-vlans statistics, Clear vlan byte-accounting – Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) User Manual

Page 225

Advertising
background image

Multi-Service IronWare Switching Configuration Guide

195

53-1003036-02

Command changes to support Gen-2 modules

7

The vlan-accounting on command enables counters for a specific VLAN. The vlan-accounting off
command disables counters for a specific VLAN.

clear vlan all-vlans statistics

The clear vlan byte-accounting all-vlans command has been deprecated. The new command is the
clear vlan all-vlans statistics command.

To clear VLAN counters for all VLANs, enter the following command.

Brocade# clear vlan all-vlans statistics

Syntax: clear vlan all-vlans statistics

clear vlan byte-accounting

The clear vlan byte-accounting command has been has been deprecated. The new command is the
clear vlan statistics command.

To clear the VLAN counters on a specific VLAN, say VLAN 10, enter the following command.

Brocade# clear vlan 10 statistics

Syntax: clear vlan vlan-id statistics

Use the vlan-id parameter to specify the name of the VLAN to clear statistic counter on.

Existing display command

The byte counter displayed by the output of show vlan command is the number of received bytes
across all ports (both G2 and non-G2 ports) in the specified VLAN.

TABLE 29

show vlan output details

Configured PORT-VLAN entries

Number of port-based VLANs in the configuration.

Maximum PORT-VLAN entries: 4090

Maximum number of port-based VLANs that you can configure.

Default PORT-VLAN id

ID of the default VLAN.

PORT-VLAN

ID of the port-based VLAN.

Brocade# show vlan

Configured PORT-VLAN entries: 3

Maximum PORT-VLAN entries: 4090

Default PORT-VLAN id: 1

PORT-VLAN 1, Name DEFAULT-VLAN, Priority Level0

L2 protocols : NONE

Untagged Ports : ethernet 2/1 to 2/20 ethernet 3/1 to 3/20 ethernet

PORT-VLAN 2, Name [None], Priority Level0

L2 protocols : NONE

ip-protocol VLAN, Dynamic port disabled

Name: basic

PORT-VLAN 1001, Name [None], Priority Level0

L2 protocols : MRP

Tagged Ports : ethernet 3/1 ethernet 3/12 to 3/13 ethernet 3/20

Bytes received : 6000

Advertising