Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 721)

Multi-Service IronWare Switching Configuration Guide 691
53-1003036-02
MCT Snooping
18
Router ports: 4/3 (97s)
Flags: R-Router Port, V2|V3: IGMP Receiver, P_G|P_SG: PIM Join
1 (*, 224.1.1.1 ) 00:07:09 NumOIF: 2 profile: none
Outgoing Interfaces:
e4/3 vlan 20 ( R) 00:02:42/97s
e3/2 vlan 20 ( V2) 00:07:09/91s
1 (1.1.1.1, 224.1.1.1) in e4/3 vlan 20 00:02:20 NumOIF: 1 profile: none
Outgoing Interfaces:
e3/2 vlan 20 ( V2) 00:02:20/0s
FID: 0x8005 MVID: None
Syntax: show ip multicast vlan <vlan-id>
The vlan <vlan-id> parameter displays IP multicast VLAN information for a specified VLAN.
Displaying IP multicast statistics
To display IP multicast statistics on a device, enter the following commands at any level of the CLI.
Brocade##show ip multicast vlan 20 statistics
VLAN ID 20
Receive stats: Transmit stats:
General query : 0 General query : 3
Group specific query : 0 Group specific query : 0
IGMP Report : 14 IGMP V2 Proxy Sent : 0
IGMP Leave : 1 IGMP V3 Proxy Sent : 0
IGMPV3 Report : 0 PIM Proxy Sent : 0
IGMPV3 Error : 0 MCT MDUP msg recvd : 10
PIMV2 hello : 0
PIMV2 join/prune : 0
PIMV2 J/P pkt error : 0
MCT MDUP msg sent : 5
MCT MDUP msg error : 0
Syntax: show ip multicast statistics
For information regarding the output fields, refer to “Displaying IP multicast information”.