Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 241)

Multi-Service IronWare Switching Configuration Guide 211
53-1003036-02
Displaying VLAN information
7
Displaying VLAN group information
To display information about VLAN groups, enter the following command.
Brocade# show vlan-group 10
Configured VLAN-Group entries : 1
Maximum VLAN-Group entries : 32
VLAN-GROUP 10
Number of VLANs: 4
VLANs: 10 to 13
Tagged ports: ethernet 3/1
Syntax: show vlan-group [vlan-group-id] [ begin expression | exclude expression | include
expression]
The output shows the following information.
Protocol Protocol configured on the VLAN.
State Current state of the port such as disabled, blocking, forwarding, etc.
TABLE 39 Output of show vlan Ethernet
This field... Displays...
Configured VLAN-Group entries Number of VLAN groups that have been configured on the device.
Maximum VLAN-Group entries Maximum number of VLAN groups that can be configured on the device.
VLAN-Group # ID of the VLAN group
VLANs VLANs that belong to the VLAN group.
Tagged ports: Type and ID of the tagged ports that are members of the VLAN group
TABLE 38 Output of show vlan detail (Continued)
This field... Displays...