Edge rstp, Figure 102 – Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) User Manual
Page 490

460
Multi-Service IronWare Switching Configuration Guide
53-1003036-02
RSTP support for PB and PBB
13
The following discussion describes how to configure the nodes in the topology.
FIGURE 102
Edge RSTP topology 5
Configuring AS-1
Tag type configuration
Configure a port tag type for S-VLAN to 0x9100.
Brocade_AS-1(config)#tag-type 9100 eth 1/1
Brocade_AS-1(config)#tag-type 9100 eth 1/2
S-VLAN Configuration
Brocade_AS-1(config)#router mpls
Brocade_AS-1(config-mpls)#vpls pb-svlan 1
Brocade_AS-1(config-mpls-vpls-pb-svlan)#pbb
Brocade_AS-1(config-mpls-vpls-pb-svlan-pbb)#vlan 200
Brocade_AS-1(config-mpls-vpls-pb-svlan-vlan-200)#tag ethernet 1/1
Brocade_AS-1(config-mpls-vpls-pb-svlan-pbb)#vlan 300
Brocade_AS-1(config-mpls-vpls-pb-svlan-vlan-300)#tag ethernet 1/2
RSTP Configuration
Brocade_AS-1(config-mpls-vpls-pb-svlan)#rstp
Brocade_AS-1(config-mpls-vpls-pb-svlan)#rstp priority 100
Configuring AS-2
Tag type configuration
Configure a port tag type for S-VLAN to 0x9100.
Brocade_AS-2(config)#tag-type 9100 eth 1/1
Brocade_AS-2(config)#tag-type 9100 eth 1/3
AS‐2
ES‐1
AS‐1
Edge RSTP
CE‐1
CE‐2
1/2
S‐VLAN 300
1/3
S‐VLAN 300
1/3
1/1
1/1
1/4
1/4
1/2
1/1 S‐ VLAN 200
1/1