Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 975)

Multi-Service IronWare Switching Configuration Guide 945
53-1003036-02
show mpls config / show mpls config lsp
25
show mpls config / show mpls config lsp
The show mpls config command displays all of the user-configured MPLS parameters.
The show mpls config command and the show mpls config lsp command now displays the BFD
configuration if and only if it is not the default setting.
Syntax show mpls config [autobw-template template_name|brief|bypass-lsp
bypass_lsp_name|cspf-group cspf_group_name|dynamic-bypass|interface
[ethernet/pos/tunnel/ve]|lsp lsp_name|path path_name|static-lsp transit|vll vll_name|vll-local
vll_local_name|vpls vpls_name]
show mpls config lsp lsp_name
Parameters autobw-template
The autobw-template option displays the auto bandwidth template configuration information
specified by the template_name variable.
brief
The brief option displays the brief MPLS configuration information.
bypass-lsp
The bypass-lsp option displays the lsp configuration information specified by the
bypass_lsp_name variable.
cspf-group
The cspf-group option displays the cspf-group configuration information specified by the
cspf_group_name variable.
dynamic-bypass
The dynamic-bypass option displays the dynamic bypass configuration information specified by
the dynamic_bypass_name variable.
interface
The interface option displays the MPLS interface information specified by the ethernet, pos,
tunnel, or ve keyword.
lsp
The lsp option displays the LSP configuration information specified by the lsp_name variable.
path
The path option displays the mpls path configuration information specified by the path_name
variable.
static-lsp
The static-lsp option displays the MPLS static LSPs configuration information specified by the
transit keyword.
vll
The vll option displays the vll configuration information specified by the vll_name variable.