Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) User Manual
Page 536
506
Multi-Service IronWare Switching Configuration Guide
53-1003036-02
Displaying MRP information
14
Interface role
The interface role can be one of the following:
•
primary
•
Master node – The interface generates RHPs.
•
Member node – The interface forwards RHPs received on the other
interface (the secondary interface).
•
secondary – The interface does not generate RHPs.
•
Master node – The interface listens for RHPs.
•
Member node – The interface receives RHPs.
Forwarding state
Whether MRP Forwarding is enabled on the interface. The forwarding state can
be one of the following:
•
blocking – The interface is blocking layer 2 data traffic and RHPs
•
disabled – The interface is down
•
forwarding – The interface is forwarding layer 2 data traffic and RHPs
•
preforwarding – The interface is listening for RHPs but is blocking layer 2
data traffic
Interface Type
Shows if the interface is a regular port or a tunnel port.
RHPs sent
The number of RHPs sent on the interface.
RHPs rcvd
The number of RHPs received on the interface.
TC RHPs rcvd
The number of Topology Change RHPs received on the interface.
State changes
The number of MRP interface state changes that have occurred. The state can
be one of the states listed in the Forwarding state field.
TABLE 64
CLI display of MRP ring information (Continued)
This field...
Displays...