Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) User Manual
Page 326
296
Multi-Service IronWare Switching Configuration Guide
53-1003036-02
Configuring PBB
11
Show mac vpls X b-mac HHHH.HHHH.HHHH
The show mac vpls X b-mac command is used to display the C-MACs learned per B-MAC per VPLS
instance.
Brocade(XMR12)#show mac vpls 1 b-mac 0000.B000.0201
Total VPLS mac entries associated with b-mac 0000.B0000.0201: 2
MAC Address Port Vlan(In-Tag)/Peer ISID Age
=========== ==== ================= ==== ===
0000.0404.0000 1/1 300 30000 10
0000.0408.0000 1/1 200 30000 20
Syntax: show mac vpls X b-mac hhhh.hhhh.hhhh
hhhh.hhhh.hhhh is the C-MAC that has a B-MAC association.
Show mac vpls pbb-ib x
The show mac vpls pbb-ib command displays the C-MACs associated with any B-MAC. Otherwise,
the output refers to a specific instance. Here is a sample output:
Brocade(XMR12)#show mac vpls pbb-ib 1
Total VPLS mac entries associated with instance 1 pbb-ib: 3
MAC Address BMAC Address Port Vlan(In-Tag)/Peer ISID Age
============ ============ ==== ================= ==== ===
0000.0404.0000 0000.B000.0201 1/2 300 30000 10
0000.0414.0000 0000.B000.0201 1/2 300 30000 12
0000.0418.0000 0000.B418.0302 1/1 300 30000 20
Brocade(XMR12)#show mac vpls pbb-ib
Total VPLS mac entries: 5
VPLS ID MAC Address BMAC Address Port Vlan(In-Tag)/Peer ISID Age
======= ============ ============ ==== ================= ==== ===
3
0000.0000.0200 0000.B020.A101 4/4 120 33000 30
4
0000.0003.0220 0000.B004.B001 4/1 121 2000 22
1
0000.0404.0000 0000.B000.0201 1/2 300 30000 10
1
0000.0414.0000 0000.B000.0201 1/2 300 30000 12
1
0000.0418.0000 0000.B418.0302 1/1 300 30000 20
Syntax: show mac vpls pbb-ib x
x refers to a VPLS PBB instance. If no instance is specified, the MACs for all instances are
displayed, sorted by CMAC.
Show nht
The show nht command will show those entries that are MAC based. For MAC based entry many of
the fields displayed are not applicable and will have the N.A. value displayed.
Brocade(XMR12)#show nht
Reconcile Done -
ARP = 0, GRE = 0, MPLS = 0, phase_1 = 0, l2vpn = 0, phase_2 = 0