Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 234)

204 Multi-Service IronWare Switching Configuration Guide
53-1003036-02
IP interface commands
7
accounting mode configuration. If you have configured accounting mode to count routed and
switched packets separately, only the routed counters will be cleared. If you have configured
accounting mode to count routed and switched packets together, the combined counter will be
cleared.
To clear the routed packet and switched packet counters of a specific virtual IP interface, enter the
following command
Brocade# clear ip interface ve 2 statistics
Syntax: clear ip interface ve vid statistics
Use the vid option to specify the virtual interface name to clear.