BMW K 1100 LT/RS - Manual (Page 102)

12.16
Removing and installing starter
• Remove control unit.
• [ABS I] Remove control unit.
• [ABS II] Drain front and rear brake systems.
• [ABS II] Remove pressure modulator.
• Remove battery.
• [ABS II] Take off battery carrier.
• Release earth (ground) connection (1) at starter.
• Release positive lead at starter.
• Release second retaining screw (3).
• Pull out starter towards rear.
• Install in the reverse order of removal.
L
Note:
[ABS II] Refill the front and rear brake systems.
X
Tightening torques:
Starter to transmission ................................... 9 Nm
Positive lead to starter .................................... 5 Nm
LT120150
2
3
1